100gpd 4 stage r/o unit with inline di and pressure gauge
Reverse Osmosis RO and Di Unit With Pressure Gauge
Our RO/Di units include a DI chamber fitted as the final stage of filtration
( which is supplied filled with high quality tulsion MB115 Resin).
After passing through the Pre filters (stage 1 and 2) and the r/o membrane, the r/o filtered water is then passed through the DI filter, to reduce the TDS reading to 0.
The 4 Stages of Filtration Are:
1. 5 - Micron Sediment Filter Made of 100% Pure Polypropylene Fibres. Removes Dirt, Sand and Rust
2. A Carbon Block Filter Composed of High Performance Carbon. Removes Trihalomethanes, Pesticides, Volatile Organic Chemicals and 99.95% of Giardia and Cryptosporidium Cysts
3 . High Rejection Thin Film Composite Reverse Osmosis Membranes The Membranes Remove Contaminants Present in your Water Including, up to 99% of Dissolved Salts, Lead, Copper, Barium, Bacterial By-Products, Oestrogen and Silica
4.DI Cartridge filled with tulsion MB115 mixed bed resin for total De-ionisation (polishing the water) of your reverse osmosis water
Enabling you to achieve a total dissolved solids (TDS) of 0ppm
These Superb Systems Come with Installation Instructions, and all Pipes, Pre Filters, Post Filters, and Fittings Required for easy Installation
The input water must meet the following criteria for the unit to operate
Water temp must be less than 45 degrees Celsius
iron content max 0.1ppm
min mains water pressure 40psi (80psi min for optimum production amounts)